







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterTub-to-Shower Conversion in Irvine, CA
A tub-to-shower conversion in Irvine typically costs $4,800 to $14,500, and most jobs are finished in three to five working days. We remove the old tub, rework the drain and waterproofing, and set a walk-in shower that fits the space you already own. It’s the most requested bathroom change we get in Irvine, and it reads clearly on a written price before anyone touches the tile.
The reason the request is so common here is simple: Irvine has a large stock of homes built between the late 1970s and the early 2000s, and many of them carry a standard 60-inch alcove tub in the hall bath. Households change. A tub that made sense for young kids turns into a climbing hazard or a place to store laundry by the time the kids are teenagers. When you’re ready to plan it properly, our Bathroom Remodeling in Irvine page covers the full scope around it.
We’re a general contractor that works in Irvine every week. Every technician is background-checked and arrives in uniform, our technicians have up to 22 years of experience, and your price comes in writing before work starts. Call us at (888) 704-4104 and a live person will answer, any hour.

Key Takeaways
- Most Irvine tub-to-shower conversions run $4,800 – $14,500, driven mostly by tile, glass and whether the drain has to move.
- Because Irvine’s older slabs and drain lines sit close to grade, moving a drain is the line item that changes the number most.
- Waterproofing is the whole job underneath the tile. We use a bonded waterproofing membrane over a cement board substrate (the moisture-resistant layer behind your tile), not greenboard.
- You get a written price before demo, and the 365-Day Done Right Promise in writing on the finished work.
When You Need Tub-to-Shower Conversion
Homeowners call us about this for reasons that tend to sort into a handful of patterns. If any of these sound familiar, it’s probably time.
- The tub has become hard to get into. A standard tub wall sits about 15 inches off the floor. For a parent with a bad knee or a homeowner thinking ahead about aging in place, stepping over that wall every morning gets old fast. A curb we can keep low or remove entirely solves it.
- Nobody in the house takes baths. In Irvine’s newer enclaves like Woodbury and Portola Springs, where both bathrooms often have tubs, the second tub is frequently just square footage nobody uses. We turn it into a shower the whole household actually wants.
- The tub or surround is failing. A cracked acrylic pan, peeling caulk lines, or grout that keeps coming back are signs moisture is getting behind the wall. We regularly see this in Irvine homes with tubs from the 1980s and 1990s, where the original tile and mortar bed have done their time.
- You want the space to feel bigger. Replacing a tub with a glass shower in a hall bath typically opens the room up. The gain is more visual than square footage, but it’s real.
- There’s a trip-and-fall risk. A slippery tub floor and a high wall are a bad combination. A level shower base with a proper slope and a grab bar in reach is the safer layout.
- You’re remodeling for resale. A clean walk-in shower is one of the few bathroom changes that buyers in Irvine reliably notice, especially in condos and townhomes where a modern shower reads as updated.

Our Tub-to-Shower Conversion Process
This is the sequence we follow on a standard Irvine conversion. The exact steps shift a little with your layout, but the order stays the same.
- Written price and a real arrival window. We look at the space, take measurements, and give you a written number before any work starts. Not a range, not a ballpark on the way out the door. You also get the arrival window for the crew in writing, and the 365-Day Done Right Promise on the finished work.
- Protect the home and pull the tub. We lay floor protection, shut off the water, and remove the tub and surround. If there’s a hidden surprise under the old unit (rot, a slow leak, a floor that needs patching), we stop and tell you before going further. No price change shows up at the end that we didn’t talk through first.
- Drain and rough-in. This is the step that decides a lot of the cost. If the drain has to shift to center it under a new shower pan, we open the floor, move it, and test it before anything goes back down. On a concrete slab, which is common across much of Irvine, that’s more work than on a raised subfloor.
- Waterproofing and substrate. We build a cement board substrate and cover it with a bonded waterproofing membrane, then set the shower pan and slope it so water runs where it should. The tile is the part you see. The waterproofing is the part that decides whether the shower lasts.
- Tile, fixtures, and glass. We set the tile, install fixtures, and hang the shower enclosure. We install Kohler and Moen fixtures and Grohe shower components, all from recognized trade brands, so the parts behind the guarantee match the promise.
- Clean up and walk-through. We leave the job site cleaner than we found it, walk you through the operation of everything, and hand over the written guarantee. If anything fails inside the guarantee period, we come back and fix it at no charge.
Want to widen the scope beyond the shower? Our page on Bathroom Remodeling lays out the full-room project, and the home page shows the other work we take on.
Tub-to-Shower Conversion Pricing in Irvine
Tub-to-shower conversion in Irvine runs $4,800 to $14,500 in most cases, and the written price you get before work starts is the number on the invoice. Here’s what drives it.
| Line item | Typical range | What moves the number |
|---|---|---|
| Basic removal and shower pan install | $2,200 – $4,000 | Whether the old tub comes out cleanly and whether the subfloor needs repair |
| Tile and waterproofing | $1,500 – $4,500 | Tile type (ceramic vs. porcelain vs. natural stone), wall height, and whether we tile the ceiling |
| Glass enclosure | $500 – $1,800 | Framed vs. frameless, sliding vs. swinging door |
| Drain relocation | $400 – $1,600 | Moving a slab drain is the big variable; a raised subfloor is often cheaper to rework |
| Fixtures and valve | $300 – $1,200 | Kohler and Moen fixtures and Grohe shower components fall in this band depending on the line |
| Grab bars and safety hardware | $150 – $500 | Number of bars and how they’re mounted to blocking |
A few things push costs up in Irvine specifically. A concrete slab under much of the city means moving a drain is a concrete job, not a joist job. Condo and townhome conversions sometimes need help with HOA approval for the enclosure style, and a frameless glass door may have to match the building’s spec. Homes in older pockets near the 405 or the 5 often need subfloor repair once the tub comes out, because a slow leak has been at it for years.
Where the number comes down: keeping the drain where it is, choosing a well-priced porcelain tile over natural stone, and going with a framed enclosure instead of frameless. Our technicians have up to 22 years of experience, and when a job can be done for less without cutting into the waterproofing, we’ll tell you. The 365-Day Done Right Promise is included on every project, and a free return visit if a repair fails means no service call or re-inspection fee.
Estimates are free. Call (888) 704-4104 and we’ll come out, measure, and put a written price in your hands.
FAQs – Tub-to-Shower Conversion
How much does a tub-to-shower conversion cost in Irvine?
Most Irvine tub-to-shower conversions cost between $4,800 and $14,500, depending mostly on tile choice, glass enclosure style, and whether the drain has to move. If your drain stays put, you’ll land toward the lower end. Call (888) 704-4104 for an exact written quote, and the estimate is free.
How long does the conversion take?
A standard tub-to-shower conversion takes three to five working days once demo starts. Full-room bathroom remodel projects take longer, but the shower conversion itself is a short job. We give you a written arrival window and stick to it.
Can you move the drain, or does it have to stay where it is?
We can move the drain, and on a concrete slab it’s the single biggest cost driver. Moving a drain means cutting into the floor, re-testing, and re-pouring. If your layout allows the drain to stay put, we’ll tell you so and save you the money. If it needs to move, we’ll show you the line item before we start.
Is it cheaper to repair or replace?
If the tub and surround are failing, replace, because patching over failing waterproofing just pushes the problem deeper. If the tub is sound and the issue is only the look or the wall height, a repair or refacing may hold you for a while. We’ll tell you which one makes sense for your Irvine home before you spend anything.
Why Penhallow Remodeling Irvine
Every job starts with a written price before any work starts, and if the work fails within the 365-Day Done Right Promise, we come back and fix it at no charge. That’s in writing on every project. A live person answers the phone at (888) 704-4104 around the clock, and your technicians are background-checked and arrive in uniform. The parts we install come from brands that stand behind their own products, so the guarantee has another layer beneath it.
Ready to replace that tub with a shower you’ll actually use? Call (888) 704-4104 for a free estimate. We’ll take measurements, give you a written price, and set an arrival window before a single tool comes out of the truck.
Written by the team at Penhallow Remodeling Irvine, serving Irvine.


