







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat a Walk-In Shower Costs in Irvine, CA - And Why Your Home’s Age Changes the Number
A walk-in shower installation in Irvine typically runs $4,500 to $12,000, and a full bathroom remodel that includes one lands between $9,000 and $28,000. That’s the honest range before anyone looks inside your walls. The reason that range is wide is specific to Irvine: a walk-in shower in a 1985 Woodbridge tract home usually costs more than the same design in a 2015 Great Park build, and it has nothing to do with tile choice. It’s what’s under the old shower floor. Call (888) 704-4104 and we’ll give you a written number before we touch a thing.
We’re Penhallow Remodeling Irvine, and we do this work across the city’s older villages every week. Here’s what most online calculators leave out, and what the number on your invoice should actually reflect.

The Irvine Factor: 1970s and 1980s Shower Pans Are a Different Job
Homes built in Woodbridge, Turtle Rock, and early Northwood in the 1970s and 1980s almost always have a mortar-bed shower floor - a thick deck of packed mortar over a galvanized metal lath, with a lead or hot-mop pan liner underneath. It was the standard method for decades, and it can last 30 years or more. The problem is how it fails. It fails slowly, from the inside, and by the time the tile above it looks wrong, moisture has been sitting in that bed for a long stretch.
Modern walk-in showers are built on a foam pan system with a bonded waterproofing membrane - Schluter Kerdi is the one we specify most often - that keeps water above the structure instead of letting it soak into it. When we open an older Irvine shower, we’re not just removing tile. We’re removing a failed mortar bed, checking the framing underneath for moisture damage, and rebuilding a waterproof base to current code. That demo, any framing remediation, and the new membrane is a real line item - usually $600 to $1,200 on top of the base shower cost. It goes in your written price before work starts, not as a change order after demo day.
In Turtle Rock, we regularly see pans where the original liner has cracked along the drain collar from twenty-plus years of thermal movement. It doesn’t leak into the room. It leaks under the floor, quietly, into the subfloor and sometimes the ceiling below. That’s the sentence no cost calculator will write for you.
Why Irvine’s Dry Climate Doesn’t Save Your Grout
Irvine’s semi-arid climate does not eliminate bathroom moisture problems - it concentrates them. With low ambient humidity most of the year, grout and caulk joints cycle through expansion and contraction more aggressively than they would in a damp coastal climate, and every one of those cycles works a joint a little looser. Then fall arrives, the Santa Ana winds push through, indoor humidity drops hard, and every new or old joint in the house gets a stress test.
That’s why our tile spec includes a minimum caulk-joint width at corners and transitions, sized to allow movement rather than crack under it. Grout in a corner is a crack waiting to happen; a properly sized flexible joint is not. It’s a small detail that separates a shower that survives its first autumn from one that doesn’t.

Comparing Quotes in Irvine: What to Look For
When you’re comparing three bids on the same walk-in shower, the numbers may look similar and still describe different jobs. Here’s what to sort out before you sign:
- Is the waterproofing method named? If a quote says “tile over new pan” without specifying the membrane (Schluter Kerdi or a comparable system), ask which one. It’s the single most important line in the estimate.
- Is the permit in the price? A walk-in shower conversion in Irvine needs a city permit for plumbing and tile work above a certain scope. We include the permit fee and inspection scheduling in the written price so there’s no surprise on the invoice.
- Are fixtures named by brand? We specify Kohler and Moen on shower projects because both carry manufacturer warranties that are transferable at resale - and in Irvine’s active real estate market, buyers and their inspectors increasingly flag non-brand plumbing hardware in updated bathrooms.
- What happens if a joint fails in month eight? Our 365-Day Done Right Promise covers grout joint integrity and waterproofing performance for a full year after installation, in writing. If it fails, we come back and fix it at no charge.
- Is the price written? A verbal ballpark on the first visit is not a price. Every Penhallow homeowner gets a written number before work starts, and that number is what appears on the invoice.
Walk-In Shower Cost Breakdown for Irvine
Below are the ranges we work from in Irvine. Every project is priced from the actual scope after an on-site look, but this is what the market looks like today.
| Item | Typical Cost Range |
|---|---|
| Walk-in shower installation | $4,500 - $12,000 |
| Tub-to-shower conversion | $3,500 - $10,000 |
| Shower replacement | $3,000 - $8,500 |
| Full bathroom remodel (includes shower) | $9,000 - $28,000 |
| Small bathroom remodel | $5,000 - $12,000 |
| Bathroom vanity installation | $800 - $3,000 |
What pushes a walk-in shower toward the top of that range: a failed mortar-bed pan and the substrate work behind it, a curbless (zero-threshold) design that requires extra framing and membrane detailing, large-format tile that’s harder to cut and set, and a frameless glass enclosure. What keeps it lower: a modern foam-pan base already in place, standard sizes, and keeping the drain location where it is.
For the broader picture of what a full bath project involves, see our Bathroom Remodeling page. If your home is one of those older village tracts and you’re weighing the whole room versus just the shower, our Bathroom Remodeling in Irvine page walks through how we sequence a full gut versus a shower-only scope. You can also start from our home page for the full range of what we do.
A Word on Irvine’s Inspection Culture
Irvine is a master-planned city, and construction here runs under HOA architectural review and one of the more exacting city inspection environments in Orange County. Almost every project touches a tract home governed by recorded design guidelines. For a shower conversion that means the permit and inspection path matters - and it’s part of why we build a real arrival window and a clean-site standard into every job. Say the price before the work. Show up in the window we gave. Leave the place cleaner than we found it. That’s The Kingswell Way, and it’s the same on a $5,000 shower as on a full remodel.
FAQs
A walk-in shower installation in Irvine typically costs $4,500 to $12,000, with the average landing around $7,000 to $9,000 for a standard tile shower with a frameless glass door. Older 1970s and 1980s homes in Woodbridge or Turtle Rock frequently add $600 to $1,200 for mortar-bed removal and substrate remediation. Call (888) 704-4104 for an exact quote - estimates are free.
If the waterproofing under the tile is intact and only the surface is worn, a repair can make sense; once the mortar bed or pan liner has failed, replacement is the cheaper path over time because the damage is already spreading. We won’t recommend replacement unless the inspection shows the base is gone. Call (888) 704-4104 and we’ll tell you honestly which one you’re looking at.
Yes, in most cases - a walk-in shower conversion involves plumbing and tile work above a certain scope, and the City of Irvine requires a permit for it. Our written upfront price includes the permit fee and inspection scheduling, so there’s no after-the-fact surprise. Call (888) 704-4104 to talk through your specific scope.
A shower-only installation typically runs 5 to 10 working days from demo to final sealant, depending on substrate condition and tile selection. A full bath remodel alongside it runs 2 to 4 weeks. We give you the arrival window in writing before we start. Call (888) 704-4104 to book a free on-site estimate.
Get a Written Price Before You Commit
If you’re in an Irvine village home and thinking about a walk-in shower, the smartest first move is a free on-site look. We’ll inspect what’s under the existing floor, hand you a written price with the permit and waterproofing scoped in, and back the work with the 365-Day Done Right Promise. Live person answers the phone, day or night. Call (888) 704-4104 today for your free estimate.
Written by the team at Penhallow Remodeling Irvine, serving Irvine, CA.
What Our Customers Say
"Kitchen and dining room opened up into one space. They were honest about which wall could come down and which couldn't, no sugarcoating. Dust was kept way down with plastic everywhere."
- Oscar Benitez"Solid kitchen remodel. The only hiccup was a mixup on the cabinet hardware that added a few days, but they ordered the right ones and didn't charge me for their mistake. Would hire again."
- Gregg Lanier"Did our whole kitchen. The written estimate held, which after reading remodel nightmares online I did not take for granted. Showed up every morning on time and the crew was clean and polite."
- Warren Updike












