







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Delta Bathroom Remodeling in Irvine: What to Know First
Delta bathroom remodeling in Irvine typically runs $9,000 – $28,000 for a full remodel, with most projects finished in two to four weeks once materials are on site. We provide independent Delta bathroom remodeling in Irvine, and we put a written price in front of you before any tile is pulled or fixture is set. If your Delta shower valve, Delta tub or Delta toilet is at the center of the project, we plan the whole remodel around it so the parts behind the wall match the parts you can see. Call Penhallow Remodeling Irvine at (888) 704-4104 to schedule a free estimate.
This page is for Irvine homeowners who already own Delta products and want a remodel that respects what’s there: keeping a working Delta Monitor valve, replacing a worn-out Delta tub, or upgrading a Delta shower without tearing out drywall you don’t need to touch. As an independent Delta service provider, we’re not affiliated with or authorized by Delta. We’re a general contractor that knows the product line and builds bathroom remodels around it.
Key Takeaways
- Full Delta bathroom remodels in Irvine run $9,000 – $28,000; small bathroom remodels run $5,000 – $12,000.
- Delta shower valves (Monitor and MultiChoice lines) are the most common parts we’re asked to preserve or replace.
- Every project gets a written price before work starts and our 365-Day Done Right Promise in writing.
- Technicians are background-checked, uniformed, and bring up to 22 years of experience to each job.
How Delta Products Fail – and How We Fix Them
Delta gear holds up well, but in Irvine’s climate and housing stock we see the same handful of failures repeated across projects. Knowing which Delta line is failing and why changes the fix entirely.
- Delta Monitor valve cartridges that stop mixing correctly. The 1300 and 1400 series Monitor valves use a pressure-balancing cartridge that wears out after years of Irvine’s hard water. The symptom owners describe is water that runs hot, then drifts cold when a nearby faucet is used. We replace the cartridge, not the whole valve body, whenever the rough-in is sound. That keeps the Delta trim and saves you the cost of cutting into tile.
- Delta MultiChoice universal valve leaks at the bonnet. The MultiChoice rough-in valve is meant to be serviceable without opening the wall, but the bonnet nut and O-rings harden over time and seep. A slow drip that shows as a water stain on the ceiling below is the tell. Our fix is to reseat the bonnet and swap the seals; if the seat is scored, we replace the valve body during the remodel’s rough-in stage so you’re not doing it again in two years.
- Delta shower pans and tile that fail at the substrate. In a bathroom remodel this is where Delta fixtures and older construction meet. When we pull a tub or pan and find greenboard instead of cement board substrate (the moisture-resistant layer behind your tile), the tile wasn’t doomed by the Delta valve; it was doomed by the substrate. We rebuild with cement board and a bonded waterproof membrane so the new shower outlasts the fixture.
- Delta toilets with a leaking fill valve or flapper. The Delta Foundations and Prelude lines use a fill valve that develops a slow refill hum when the diaphragm wears. It’s a small parts cost, and we replace it during the remodel rather than charging a separate trip. If the toilet itself is going, we’ll set a Toto as the alternative and tell you why.
- Delta tub-to-shower conversions done too fast. Irvine owners often want to convert a Delta soaking tub to a walk-in shower. If the drain rough-in and the Delta valve position aren’t replumbed correctly, the new shower floods the wrong side of the curb. We map the drain before demolition so the shower pan pitches correctly from day one.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Delta Bathroom Remodeling Process
We run every Delta job the same way, and we run it the way The Kingswell Way asks: say the price before the work, show up in the window we gave, leave the place cleaner than we found it.
- 1
Diagnostics on the call and at the walkthrough. We identify the Delta series you own, test the valve, check for leaks behind the wall if there’s evidence, and measure the room. You get a written scope before we leave.
- 2
Written price, no surprises. You receive a written price with line items for labor, materials, and any plumbing work. Not a verbal ballpark, not a range that grows after demo day.
- 3
Parts decision: OEM versus quality aftermarket. Delta OEM parts carry the manufacturer warranty; some aftermarket cartridges are cheaper but can void it. We tell you which way to go and why on each part.
- 4
The remodel and repair. Demo, rough-in, substrate, tile, fixtures, finish. We protect the rest of your home with drop cloths and plastic sheeting before we touch anything.
- 5
The test. We run every fixture, check for leaks at the valve, the drain and the supply lines, and confirm the shower drains correctly before we call the job done.
- 6
The guarantee and cleanup. You get the 365-Day Done Right Promise in writing and a clean job site. If it’s not done right, we come back at no charge.
See the difference
Before
After
Before
After
Before
AfterWhat Delta Bathroom Remodeling Costs in Irvine

Irvine pricing depends on the scope and which Delta parts you’re keeping or replacing. Here are the ranges we quote most often.
- Full Delta bathroom remodel: $9,000 – $28,000
- Small bathroom remodel (keeping existing Delta fixtures where sound): $5,000 – $12,000
- Walk-in shower installation: $4,500 – $12,000
- Tub-to-shower conversion: $3,500 – $10,000
- Shower replacement (keeping the Delta valve): $3,000 – $8,500
- Bathroom vanity installation: $800 – $3,000
What moves the price: whether the substrate behind the tile is sound, whether the Delta rough-in valve needs replacing or just a cartridge, the tile you choose, and whether the layout changes. Keeping a working Delta MultiChoice valve and rebuilding around it often saves $1,500 – $3,000 versus a full replumb. Call (888) 704-4104 for a free written estimate on your Irvine bathroom. The number on day one is the number on the invoice.
Why Irvine Homeowners Call Penhallow Remodeling Irvine for Delta Work
Our technicians have up to 22 years of experience, including on Delta Monitor and MultiChoice systems, so the parts call is made by someone who’s seen that cartridge fail before. Every technician is background-checked and arrives in uniform; you know exactly who is walking into your home. A live person answers our phone 24/7, not a voicemail prompt, so you get a real answer when a leak turns up.
Every project carries our 365-Day Done Right Promise in writing, and if something fails inside that window we come back at no charge. We draw from trade brands we trust alongside Delta: KraftMaid cabinetry, Kohler and Toto fixtures, and Cambria quartz for vanities. When we install a Cambria top or a Kohler fixture, that manufacturer’s own warranty sits alongside ours, so there’s more than one layer of protection behind the work. Call (888) 704-4104 for a free estimate.
FAQs

No, as long as the Delta parts themselves aren’t altered or replaced with non-Delta components in a way that causes the failure. Keeping the original Delta valve and trim intact preserves coverage on those parts. We note in your written scope which Delta components we’re keeping and which we’re replacing so the warranty record stays clear.
Usually, yes. Delta’s Monitor 1300/1400 and MultiChoice parts are widely available, and we source OEM cartridges when we can. If a specific part is discontinued, we tell you and lay out the alternatives: a compatible OEM service kit or a valve upgrade. We won’t swap in a cheap aftermarket cartridge that risks the warranty without telling you first.
If the valve body and rough-in are sound, repairing the cartridge or bonnet seals is often the right call and saves the cost of opening the wall. If the seat is scored or the substrate behind the tile has failed, a replacement during the remodel is more economical than doing two jobs. We test the valve before recommending either path.
Most full remodels take two to four weeks once permits and materials are in hand. Small bathroom remodels and tub-to-shower conversions often finish in ten to fourteen days. We give you the timeline in writing with the price, and we show up in the arrival window we committed to.
Yes. Bathroom remodels that move plumbing or electrical require permits in Irvine, and we pull them and pass inspection as part of the project. Call (888) 704-4104 for a free estimate; we’ll tell you up front whether your scope needs a permit and what it adds to the price.
Ready to plan your Delta bathroom remodel in Irvine? Call Penhallow Remodeling Irvine at (888) 704-4104 for a free estimate. You’ll get a written price before any work starts, a real arrival window, and the 365-Day Done Right Promise in writing. Our technicians are background-checked and uniformed, and a live person answers the phone 24/7.
Written by the team at Penhallow Remodeling Irvine, serving Irvine and nearby areas.












