







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Toto Bathroom Remodeling in Irvine: What to Know First
Toto bathroom remodeling in Irvine typically runs $9,000 – $28,000 depending on how much of the room we touch, and most full remodels take two to four weeks from demo to final walkthrough. We’re an independent Toto service provider, not affiliated with or authorized by Toto, and we work on the fixtures you already own. You get a written price before any work starts: not a range, not a verbal ballpark. If you’ve been quoted a number that crept up after demo day, you’ll find a different way of working here.
This page is for Irvine homeowners with a Toto toilet, bidet seat, or washlet who want their bathroom brought up to the standard the fixture deserves. Call (888) 704-4104 to schedule a free estimate.
How Toto Products Fail – and How We Fix Them
Toto builds some of the most reliable bathroom fixtures sold in Irvine. Most of the problems we see in Orange County homes aren’t the fixture failing; they’re the installation, the water, or the parts around it. Here’s what actually goes wrong.
- Washlet and bidet seat inlet valves clog with mineral scale. Irvine water carries high calcium hardness, and a S550e or C200 washlet that stops spraying or sprays weakly almost always has scale buildup in the inlet filter and valve. We pull the unit, clean or replace the filter, and swap the valve. Owners often replace the whole seat when a $40 valve would’ve fixed it.
- Toilet base leaks and soft floors around the flange. On Drake and Vespin models, a rocking toilet usually means a failed wax ring or a worn closet flange. In Irvine homes built in the 1970s and 80s, that flange is often cast iron and rusted thin. We pull the toilet, replace the flange and ring, and rebuild the subfloor if the leak has spread. We don’t set a toilet back on a bad flange.
- Cracked fill and flush valves from chlorine and hard water. Toto’s fill valves (the 528 and 550 series) are durable, but Irvine’s water chemistry eats the rubber flappers and seals early. A running toilet you hear cycling at night is the tell. We install OEM valves and flappers. The thread patterns differ across models, and a generic third-party flapper can cause weak flushing.
- Washlet circuit boards and cords failing near moisture. A washlet with no power or a blinking indicator light often has a board issue or a cord that’s been sitting in a wet zone for too long. We diagnose the electrical path, recommend a moisture-safe layout for the outlet, and replace the board where the part is still available. Toto warranties washlets by serial number, so we check that before you spend money.
- Rough-in mismatches during a toilet replacement or remodel. Toto’s 12-inch rough-in is standard, but Irvine bathrooms often have 10-inch or 11-inch rough-ins after a wall moves. Setting a Toto with the wrong rough-in causes a hidden leak at the back or a water hammer. We measure the rough-in before ordering the fixture, and we spec the correct extension kit or model variant so you don’t pay twice.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Toto Bathroom Remodeling Process
Every Toto job follows the same sequence. It’s the same every time because homeowners have been through a remodel where steps got skipped, and the reminders matter.
- 1
Diagnostics and rough-in check. We test the toilet, the washlet, and the supply lines. We measure the rough-in, check the floor around the flange, and photograph what we find.
- 2
Parts decision, explained. We price OEM parts and quality aftermarket side by side. When a Toto warranty is still active, we tell you before we touch anything, because we won’t void it.
- 3
Written price before work starts. You get the line items: parts, labor, tile, vanity, and any substrate work, in writing. That’s the number on the invoice.
- 4
The repair or remodel itself. Background-checked, uniformed technicians. Drop cloths, floor protection, and the bathroom door closed while we work.
- 5
The test. Full flush cycle, washlet functions, no leaks at the flange or supply line, and a moisture check on the surrounding floor.
- 6
The guarantee and the cleanup. You get a written guarantee with every job, and we leave the room cleaner than we found it.
See the difference
Before
After
Before
After
Before
AfterWhat Toto Bathroom Remodeling Costs in Irvine

Most Irvine bathroom remodels land between $9,000 and $28,000. Here’s how the pieces add up when Toto fixtures are part of the plan:
- Full bathroom remodel: $9,000 – $28,000
- Small bathroom remodel: $5,000 – $12,000
- Walk-in shower installation: $4,500 – $12,000
- Tub-to-shower conversion: $3,500 – $10,000
- Shower replacement: $3,000 – $8,500
- Bathroom vanity installation: $800 – $3,000
What pushes the number up: tile selection, whether the subfloor needs rebuilding around a Toto flange, moving plumbing for a new layout, and whether you’re keeping your existing Toto or adding new fixtures. What keeps it down: keeping the current layout, choosing stock tile, and not moving the drain. Call (888) 704-4104 for an exact quote. Estimates are free, and you get the price in writing.
Why Irvine Homeowners Call Penhallow Remodeling Irvine for Toto Work
Our technicians have up to 22 years of experience, and a fair number of those years have gone to Toto fixtures. We know the differences between a Drake and a Vespin, which fill valve thread goes in which tank, and what an idle washlet indicator actually means before the meter runs. We’re part of the Kingswell family of companies, operating to The Kingswell Way since 2004: say the price before the work, show up in the window we gave, leave the place cleaner than we found it.
Every job comes with the 365-Day Done Right Promise in writing. If the work fails inside the year, we come back and fix it at no charge, and if a repair fails, the return visit is free. A live person answers the phone 24/7, not an answering service. We also install KraftMaid cabinetry, Kohler fixtures, and Cambria and Silestone countertops when the rest of the room is ready for it, so you’re not handing a Toto install to one crew and the vanity to another.
FAQs

No, but rough handling and third-party parts can. Toto’s warranty runs on the serial number and covers the fixture itself, not the installation. We check whether your washlet or toilet is still under warranty before we recommend replacing anything, and when we do install OEM parts so the warranty stays intact.
Most common parts (fill valves, flappers, wax rings, supply lines) are available to us quickly, and OEM parts are worth the wait for the flush and fill system. Specialty washlet boards and unusual model variants can take longer. Call (888) 704-4104 and we’ll tell you what we can source and when.
Repair usually wins if the fixture is under 10 years old and the model is still supported. Replace when the washlet electronics have failed twice, the porcelain is cracked, or the rough-in needs to change for a new layout. We’ll tell you which side of that line you’re on after diagnostics, not before. Call (888) 704-4104 for a free estimate.
A small bathroom remodel runs about a week to ten days; a full remodel runs two to four weeks. Toto fixture work itself is short, usually a day, but tile, substrate, and curing time drive the schedule. You’ll get a start date and an arrival window in writing before we begin.
No, that’s the whole point of the way we work. You get a written price before any work starts, and the number on day one is the number on the invoice. If we find something hidden (a rusted flange, water damage under tile), we stop, show you, and quote the extra work in writing before we continue. Call (888) 704-4104 to schedule your free estimate.
Written by the team at Penhallow Remodeling Irvine, serving Irvine and nearby areas.












